GLOBE AND SAUCER SHAPED SPACECRAFT. This type of spacecraft functions in a different manner than do cigar-shaped craft. This type of ship doesn't use energyplane 2 (EP2) waves from a star as its reference. Instead, it uses a universal EP2 reference which is present all over the universe and which doesn't have any specific direction. Inside a globe-shaped spacecraft are 3 reflecting areas placed in the pattern of a 3 dimensional triangle. This material reflects EP2 waves. The 3 reflectors are used for propulsion and steering. The reflectors reflect the energy which is directed against them from an EP2 generator. In a saucer-shaped spacecraft these generators can be placed in a triangular pattern under the spacecraft or at least inside the undersection of the spacecraft. In some spacecraft the generators are not directed against a reflecting material, but use antennae directly inside 3 globes. In the drawing of the globe-shaped spacecraft only one reflector is shown. Generator B is a heterodyne generator to generator A. Generator A can change it's phase 360 degrees with respect to generator B. The generator A+B swingproduct will be at the frequency of a universal EP2 wave. The reflector will beam the A+B swingproduct in the travel direction. Since we have 3 different A-type Generators in the spacecraft in a triangular pattern, we can steer the ship in the proper direction by putting different phases at the generator A antennae. Then the spacecraft will travel along the resulting vector which are the sum of the 3 different generator A forces. Forward Menu