CIGAR SHAPED SPACECRAFT (System B Propulsion) Large cigar shaped "mothership" craft use system B, which is essentially a wave propulsion system. The system generates energyplane 2 (hereafter, EP2) waves which are in counter or discounter phase to EP2 waves present in space. The mothership operates according to the following general description: At the front of the ship are some conic holes. These "holes" are transmitting and receiving devices. The "holes" can be invisible seen from the outside of the ship. The receiving holes are placed behind the transmitting holes. When preparing for interstellar travel, the ship directs its front in the direction of the target star. The swingproduct from this star at EP2 are received by the receiving holes. These holes are connected to an EP2 receiver. In the receiver the signals are digitized. Then the signal is directed to a powerful computer. This computer calculates the modulation frequency picture which will put the ship in the right phase with respect to the EP2 waves from the star. This electrical frequency picture is generated by a PLL generator array. The frequency picture is split up into many channels. Each channel is amplified to a amplitude of 1000000 Volt PEP. Each channel is connected to specific electrodes inside a high-energy modulator tube. Through this tube runs an orgon force or other suitable force. Forward Menu